Combination RTD and Thermocouple


RTD Thermocouple Combination Sensor-



flex_armor

Do you have a process temperature to measure and cannot decide on a RTD or a thermocouple? Use both.

We have combined a RTD and a type K thermocouple in one convenient assembly. This sensor is manufactured with high temperature ceramic cement and fiberglass insulated wire, to provide the maximum operating range for the thermocouple. The sensor can be configured to your dimensional requirements or it may be purchased off the shelf with a 3/16" O.D., stainless steel sheath, 2" in length, and 60" of lead wire.



 

 

Standard Specifications for RTD / Thermocouple Combo-

  • Platinum 100 ohm +/- 0.12% @ 0°C (Class B Accuracy)
  • Temperature Coefficient= 0.00385
  • 2 Wire Config: 24 AWG, solid nickel wire, fiberglass insulated
  • Type K thermocouple
  • Ungrounded Junction
  • Temperature Range- -50 to 600°C
  • Lead Length- 60"
  • Sheath Materical- Stainless Steel sheath
  • Each probe etched with lot number to provide traceability

    Changed can be made to:

  • RTD Type- PT25, 100, 200, 500, 1000

  • Nickel, copper, balco, thermistor or semi-conductor temperature elements

  • Thermocouple Types- T, J, E, N, R, S, B

  • Temeprature Range- -250 to 850°C

  • Accuracy

  • Wire Configuration

  • Sheath Material

  • Sheath Diameter

  • Sheath Length

  • Wire Material

  • Lead Length

     

     

    sales@thermometricscorp.com